Plastic repairs made easy
Professionals considered TTP90 the number 1 when it comes to plastic repairs. It will repair almost all plastic types, as a result, there is not need to buy many products for different plastics.
Customers can get perfect results following our SIMPLE GUIDE TO PLASTIC REPAIRS
TTP90 cures in 20 minutes at 20°C thereby speeding up the repair process considerably.
Car bumper repairs to Motorbike fairing repairs
Cracked car bumpers are easily repaired in no time. As a perfect ‘feather edge’ can be achieved sanding can be reduced to a minimum. You can prime directly over TTP90.
Replacement front grills, bumpers and wheel steps on commercial vehicles are extremely expensive. Vehicle owners can perform ‘bodyshop quality’ repairs with TTP90. This saves money and obviously downtime as a vehicle can be back on the road quickly.
Plastic or fibreglass lugs breaking can be a real problem to repair. TTP90 will quickly and securely bond these back in place.
Lugs on headlight assembly units can cause real bonding problems but again TTP90 will do the repair.
Bus & Coach
Coach mirror housings are particularly exposed and as a result can be damaged easily. Replacement housings are extremely expansive. You can use TTP90 to repair cracks or bond sections back together. As a result saving the operator a costly replacement plus downtime.
Motorbikes and Quads
Cracked motorbike fairings are particularly difficult to repair. And quad bike housings are very prone to damage. Customers can easily fix these with TTP90.
Economical to Use
TTP90 comes in a handy resealable tube. Therefore wastage is eliminated as you seal the tube after usage until required again.
Users need to discard the short mixer tip after each job. This is because TTP90 starts curing after 1.5 minutes. However as the mixer tip mainly contains mixing chambers customers will experience minimal product.
Link to Technical sheets